Positioning The Scanner On The Optional Floor Stand; Connect The Optional Foot Switch - Image Access WideTEK 36DS Setup Instructions

Prepare for Setup
To establish the network connections, proceed as follows:
➢ Connect one plug of the enclosed network cables to the network
connector sockets on the left of the scanner.
➢ Connect the second plugs to the network sockets of an existing
network.

Positioning the Scanner on the Optional Floor Stand

The scanner weighs 64 kg.
➢ Only carry the scanner with a second person.
➢ Ensure that the scanner is secured so that it does not fall
over.
To position the scanner on the optional floor stand, proceed as follows:
➢ Assemble the floor stand according to the floor stand assembly
instructions.
➢ Position the scanner on the floor stand as described in the
accompanying floor stand assembly instructions.

Connect the Optional Foot Switch

Incorrect laying of the connection cables can cause tripping.
Fractures, contusions and bruises can be the result.
➢ Place the connecting cables so that nobody can trip over
them.
To connect the optional foot switch, proceed as follows:
➢ Connect the plug of the foot switch to the connector socket for the foot
switch, located on the left of the scanner.
18
CAUTION
CAUTION