Static Colors, Strobe, & Sound Active Mode; Manual Color Mixing; Led Display On/Off; Dimming Curve & Speed Settings - Blizzard Lighting LB HEX User Manual

Speed Settings:
1.) Navigate the main menu until you reach Sp--, and press <ENTER>.
2.) Then use the <UP/DOWN> buttons to select a speed setting from 0-99.
3.) Press the <ENTER> button to confirm.
Static Colors, Strobe, & Sound Active Mode
1.) Navigate the main menu until you reach CoLo, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to select any of its static colors from 0-63.
3.) Press the <ENTER> button to confirm your choice.
4.) You can then add a strobe effect if desired.
Sound Active: Navigate the main menu until you reach SOUN, and press <ENTER>.

Manual Color Mixing:

Mix your own custom colors using the R/G/B/A/W/UV intensity level setting.
Red:
1.) Navigate the main menu until you reach rL--, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to adjust red 000-255. (0% <--> 100%).
3.) Press the <ENTER> button to confirm.
Green:
1.) Navigate the main menu until you reach GL--, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to adjust green 000-255. (0% <--> 100%).
3.) Press the <ENTER> button to confirm.
Blue:
1.) Navigate the main menu until you reach bL--, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to adjust blue 000-255. (0% <--> 100%).
3.) Press the <ENTER> button to confirm.
Amber:
1.) Navigate the main menu until you reach AL---, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to adjust white 000-255. (0% <--> 100%).
3.) Press the <ENTER> button to confirm.
White:
1.) Navigate the main menu until you reach uL---, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to adjust white 000-255. (0% <--> 100%).
3.) Press the <ENTER> button to confirm.
UV:
1.) Navigate the main menu until you reach UL---, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to adjust white 000-255. (0% <--> 100%).
3.) Press the <ENTER> button to confirm.

LED Display On/Off:

You can set the LED menu display to either stay on continually, or turn off after 30 seconds of inactivity.
1.) Navigate the main menu until you reach LEd, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight either on or oFF.
3.) The On setting will keep the display on continually, and oFF will turn the display off after 30s.
4.) Press the <ENTER> button to confirm your choice.
Dimming Speed & Curve Settings:
You can manually set the fixtures dimming curve of your choice:
1.) Navigate the main menu until you reach node, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight a speed from 0-4 (fast <--> slow).
3.) Press the <ENTER> button to confirm.
LB-Hex User Manual Rev. B
Strobe:
a.) Navigate the main menu until you reach Strb, and press <ENTER>.
b.) Then use the <UP/DOWN> buttons to select a strobe speed setting from 0-20
(fast <--> slow).
c.) Press the <ENTER> button to confirm.
Page 13
© 2017 Blizzard Lighting, LLC