Control Panel Menu Structure; Dmx Mode; Set The Starting Dmx Address; Working Mode Settings - Blizzard Lighting Laser Blade G Manual

Control Panel Menu Structure

Address
Work Mode Set
X Mirror Set
Y Mirror Set
X Run Set
Y Run Set
Graph Mode Set
Speed Set

DMX Mode

Allows the unit to be controlled by any universal DMX controller.

Set the Starting DMX Address:

The default mode for the fixture is DMX, so the first menu item that you can edit is
the starting DMX address.
1.) Navigate the menu using the <UP/DOWN> buttons until you reach Address.
2.) Push the <ENTER> button.
3.) Use the <UP/DOWN> buttons to select a DMX channel from 001-512.
4.) Press the <ENTER> button to confirm.

Working Mode Settings:

Set the fixture to run in DMX, Auto, Sound Active, and Slave Modes
1.) Navigate the menu using the <UP/DOWN> buttons until you reach Work
Mode Set.
2.) Push the <ENTER> button.
3.) Use the <UP/DOWN> buttons to select either DMX, Auto, or Sound. Then
press the <ENTER> button to confirm.

Slave Mode

1.) Daisy chain the fixtures DMX in/out. The 1st fixture will be the master fixture.
2.) On fixtures you want to set as slave fixtures, navigate the menu(s) using the
<UP/DOWN> buttons until you reach Work Mode Set.
3.) Push the <ENTER> button.
4.) Use the <UP/DOWN> buttons to reach Slave. Then press <ENTER>.
Laser Blade™ G User Manual Rev. A
<ENTER>
To choose a DMX address from 001-512
Auto Auto run mode
Sound Sound active mode
DMX DMX mode
Slave Slave mode
Yes/No X mirror symmetry (reverse) on/off
Yes/No Y mirror symmetry (reverse) on/off
Run <ENTER>
Stop X Position (+/-) 1 <ENTER>
<ENTER>
Run
X Position (+/-) 1 <ENTER>
Stop
<ENTER> <UP/DOWN> to choose beams/animations
<ENTER> <UP/DOWN> to increase/decrease speed
Page 11
© Copyright 2015 Blizzard Lighting, LLC