Checking The Configuration - Huawei AR1200 Series Configuration Manual - Mpls

Enterprise routers
Hide thumbs Also See for AR1200 Series:
Table of Contents

Advertisement

Huawei AR1200 Series Enterprise Routers
Configuration Guide - MPLS
propagate mapping for ip-prefix ip-prefix-name
A policy for triggering transit LSP establishment is configured.
LDP uses all routes without filtering them to establish transit LSPs by default.
----End

2.5.12 Checking the Configuration

After configuring LDP LSPs, you can view information about LDP configurations, LDP LSPs,
and LSPs.
Prerequisite
The configurations of LDP LSPs are complete.
Procedure
l
l
l
----End
Example
If the configurations succeed, you can run the preceding commands to obtain the following
results:
Run the display mpls ldp command to view LDP information.
<Huawei> display mpls ldp
--------------------------------------------------------------------------
Protocol Version
Graceful Restart
MTU Signaling
Capability-Announcement : Off
--------------------------------------------------------------------------
Instance ID
Instance Status
Loop Detection
Label Distribution Mode : Ordered
Instance Deleting State : No
Graceful-Delete
--------------------------------------------------------------------------
Run the display mpls ldp lsp command to view LDP LSP information.
<Huawei> display mpls ldp lsp
LDP LSP Information
-------------------------------------------------------------------------------
DestAddress/Mask
-------------------------------------------------------------------------------
3.3.3.9/32
Issue 01 (2011-12-30)
NOTE
The policy for triggering transit LSP establishment cannot be modified during the LDP GR process.
Run the display mpls ldp [ all ] [ verbose ] command to check LDP configurations.
Run the display mpls ldp lsp [ all ] command to check LDP information.
Run the display mpls lsp [ verbose ] command to check LSP information.
In/OutLabel
NULL/1025
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
LDP Global Information
: V1
Neighbor Liveness
: Off
FT Reconnect Timer
: On
Recovery Timer
Longest-match
LDP Instance Information
: 0
VPN-Instance
: Active
LSR ID
: Off
Path Vector Limit
Label Retention Mode : Liberal
Instance Reseting State : No
: Off
Graceful-Delete Timer
UpstreamPeer
-
2 MPLS LDP Configuration
: 600 Sec
: 300 Sec
: 300 Sec
: Off
:
: 4.4.4.4
: 32
: 5 Sec
NextHop
OutInterface
10.1.1.2
GigabitEthernet1/0/0
49

Advertisement

Table of Contents
loading

Table of Contents