Huawei AR1200 Series Configuration Manual - Mpls page 35

Huawei AR1200 Series Enterprise Routers
Configuration Guide - MPLS
Example
Run the display mpls interface command to view information about all MPLS-enabled
interfaces.
<Huawei> display mpls interface
Interface
GE1/0/0
Run the display mpls ldp command to view global LDP information, including timers.
<Huawei> display mpls ldp
--------------------------------------------------------------------------
Protocol Version
Graceful Restart
MTU Signaling
Capability-Announcement : On
--------------------------------------------------------------------------
Instance ID
Instance Status
Loop Detection
Label Distribution Mode
Instance Deleting State
Graceful-Delete
--------------------------------------------------------------------------
Run the display mpls ldp interface [ verbose ] command to view LDP-enabled interface
information, including transport addresses and timers.
<Huawei> display mpls ldp interface
LDP Interface Information in Public Network
Codes:LAM(Label Advertisement Mode), IFName(Interface name)
A '*' before an interface means the entity is being deleted.
------------------------------------------------------------------------------
IFName
------------------------------------------------------------------------------
GigabitEthernet1/0/0
------------------------------------------------------------------------------
<Huawei> display mpls ldp interface verbose
LDP Interface Information in Public Network
------------------------------------------------------------------------------
Interface Name : GigabitEthernet1/0/0
LDP ID
Entity Status
Configured Hello Hold Timer
Negotiated Hello Hold Timer
Configured Hello Send Timer
Configured Keepalive Hold Timer : 45 Sec
Configured Keepalive Send Timer : 3 Sec
Configured Delay Timer
Label Advertisement Mode
Hello Message Sent/Rcvd
Entity Deletion Status
------------------------------------------------------------------------------
Run the display mpls ldp session [ verbose ] command. The command output shows that the
LDP session status is Operational.
<Huawei> display mpls ldp session
LDP Session(s) in Public Network
Codes: LAM(Label Advertisement Mode), SsnAge Unit(DDDD:HH:MM)
A '*' before a session means the session is being deleted.
------------------------------------------------------------------------------
Issue 01 (2011-12-30)
Status TE Attr
Up
LDP Global Information
: V1
: Off
: On
LDP Instance Information
: 0
: Active
: Off
: Ordered
: No
: Off
Status LAM
Active
: 1.1.1.1:0
: Active
: 15 Sec
: 15 Sec
: 2 Sec
: 0 Sec
: Downstream Unsolicited
: 29913/29878 (Message Count)
: No
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
LSP Count CRLSP Count Effective MTU
Dis 0
Neighbor Liveness
FT Reconnect Timer
Recovery Timer
Longest-match
VPN-Instance
LSR ID
Path Vector Limit
Label Retention Mode
Instance Reseting State
Graceful-Delete Timer
TransportAddress HelloSent/Rcv
DU 172.17.1.1
Transport Address : 1.1.1.1
Effective MTU : 1500
2 MPLS LDP Configuration
0 1500
: 600 Sec
: 300 Sec
: 300 Sec
: On
:
: 4.4.4.4
: 32
: Liberal
: No
: 5 Sec
2495/2514
28