Huawei AR1200 Series Configuration Manual - Mpls page 45

Enterprise routers
Hide thumbs Also See for AR1200 Series:
Table of Contents

Advertisement

Huawei AR1200 Series Enterprise Routers
Configuration Guide - MPLS
LDP Interface Information in Public Network
------------------------------------------------------------------------------
Interface Name : GigabitEthernet1/0/0
LDP ID
Entity Status
Configured Hello Hold Timer
Negotiated Hello Hold Timer
Configured Hello Send Timer
Configured Keepalive Hold Timer : 45 Sec
Configured Keepalive Send Timer : 3 Sec
Configured Delay Timer
Label Advertisement Mode
Hello Message Sent/Rcvd
Entity Deletion Status
------------------------------------------------------------------------------
Run the display mpls ldp session [ verbose ] command. The command output shows that the
LDP session status is Operational.
<Huawei> display mpls ldp session
LDP Session(s) in Public Network
Codes: LAM(Label Advertisement Mode), SsnAge Unit(DDDD:HH:MM)
A '*' before a session means the session is being deleted.
------------------------------------------------------------------------------
PeerID
------------------------------------------------------------------------------
2.2.2.2:0
3.3.3.3:0
------------------------------------------------------------------------------
TOTAL: 2 session(s) Found.
<Huawei> display mpls ldp session verbose
LDP Session(s) in Public Network
------------------------------------------------------------------------------
Peer LDP ID
TCP Connection
Session State
Session FT Flag
Reconnect Timer
Keychain Name
Negotiated Keepalive Hold Timer
Configured Keepalive Send Timer
Keepalive Message Sent/Rcvd
Label Advertisement Mode
Label Resource Status(Peer/Local) : Available/Available
Session Age
Session Deletion Status
Capability:
Capability-Announcement
Outbound&Inbound Policies Applied :
outbound peer 2.2.2.2 fec none
outbound peer all split-horizon
inbound peer 2.2.2.2 fec none
Addresses received from peer: (Count: 3)
10.1.1.2
------------------------------------------------------------------------------
Run the display mpls ldp peer command to view LDP peer information.
<Huawei> display mpls ldp peer
LDP Peer Information in Public network
A '*' before a peer means the peer is being deleted.
Issue 01 (2011-12-30)
: 1.1.1.1:0
: Active
: 15 Sec
: 15 Sec
: 2 Sec
: 0 Sec
: Downstream Unsolicited
: 29913/29878 (Message Count)
: No
Status
LAM
Operational DU
Operational DU
: 2.2.2.2:0
: 1.1.1.1 <- 2.2.2.2
: Operational
: Off
: ---
: kc1
2.2.2.2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Transport Address : 1.1.1.1
Effective MTU : 1500
SsnRole
SsnAge
Passive
0000:01:36
Passive
0000:01:30
Local LDP ID
Session Role
MD5 Flag
Recovery Timer
: 45 Sec
: 3 Sec
: 438/438 (Message Count)
: Downstream Unsolicited
: 0000:01:49 (DDDD:HH:MM)
: No
: On
10.1.2.1
2 MPLS LDP Configuration
KASent/Rcv
387/386
361/361
: 1.1.1.1:0
: Passive
: Off
: ---
38

Advertisement

Table of Contents
loading

Table of Contents