Huawei AR1200 Series Configuration Manual - Mpls page 41

Huawei AR1200 Series Enterprise Routers
Configuration Guide - MPLS
Timer
Exponential
backoff timer
Using default values of these timers are recommended.
Procedure
l
l
Issue 01 (2011-12-30)
Description
Started by an LSR that plays an
active role after the LSR fails to
process an LDP Initialization
message or is notified that
another LSR playing a passive
role rejects parameters carried in
the received LDP Initialization
message. The LSR playing the
active role periodically resends
an LDP Initialization message to
initiate an LDP session before
the Exponential backoff timer
expires.
Configure a target Hello send timer.
1. Run:
system-view
The system view is displayed.
2. Run:
mpls ldp remote-peer remote-peer-name
The remote MPLS-LDP peer view is displayed.
3. Run:
mpls ldp timer hello-send interval
The target Hello send timer is configured.
The default value of the target Hello send timer is one third of the value of a target
Hello hold timer that takes effect.
Effective value of a target Hello send timer = Min {Configured value of the target
Hello send timer, One third of the value of the target Hello hold timer}
Configure a target Hello hold timer.
1. Run:
system-view
The system view is displayed.
2. Run:
mpls ldp remote-peer remote-peer-name
The remote MPLS-LDP peer view is displayed.
3. Run:
mpls ldp timer hello-hold interval
The target Hello hold timer is configured.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 MPLS LDP Configuration
Usage
l The initial and maximum values
can be increased to allow a longer
interval between attempts to
establish an LDP session during
device upgrade.
l The initial and maximum values
can be reduced to allow a shorter
interval between attempts to
establish an LDP session if
intermittent service interruptions
occur.
34