Huawei AR1200 Series Configuration Manual - Mpls page 32
Enterprise routers
Hide thumbs
Also See for AR1200 Series:
- Configuration manual (392 pages) ,
- User configuration manual (232 pages) ,
- Hardware description (218 pages)
Table of Contents
Advertisement
Huawei AR1200 Series Enterprise Routers
Configuration Guide - MPLS
Procedure
l
l
l
Issue 01 (2011-12-30)
Perform the following steps to configure a link Hello send timer:
1.
Run:
system-view
The system view is displayed.
2.
Run:
interface interface-type interface-number
The view of an interface on which an LDP session is to be established is displayed.
3.
Run:
mpls ldp timer hello-send interval
A link Hello send timer is configured.
The default value of a link Hello send timer is one third of the value of a link Hello
hold timer.
Effective value of a link Hello send timer = Min { Configured value of the link Hello
send timer, one third of the value of the link Hello hold timer }
Perform the following procedure to configure a link Hello hold timer:
1.
Run:
system-view
The system view is displayed.
2.
Run:
interface interface-type interface-number
The view of an interface on which an LDP session is to be established is displayed.
3.
Run:
mpls ldp timer hello-hold interval
A link Hello hold timer is configured.
The default value of a link Hello hold timer is 15, in seconds.
A smaller value between two configured link Hello hold timers on both ends of the
LDP session takes effect.
Configure a KeepAlive send timer.
1.
Run:
system-view
The system view is displayed.
2.
Run:
interface interface-type interface-number
The view of an interface on which an LDP session is to be established is displayed.
3.
Run:
mpls ldp timer keepalive-send interval
A KeepAlive send timer is configured.
The default value of a KeepAlive send timer is one third of the value of the KeepAlive
hold timer.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 MPLS LDP Configuration
25
Advertisement
Table of Contents
