Huawei AR1200 Series Configuration Manual - Mpls page 110

Enterprise routers
Hide thumbs Also See for AR1200 Series:
Table of Contents

Advertisement

Huawei AR1200 Series Enterprise Routers
Configuration Guide - MPLS
A '*' before a UpstreamPeer means the session is in GR state
A '*' before a NextHop means the LSP is FRR LSP
# Display the LDP LSP on LSRD.
[LSRD] display mpls ldp lsp
LDP LSP Information
-------------------------------------------------------------------------------
DestAddress/Mask
-------------------------------------------------------------------------------
2.2.2.2/32
2.2.2.2/32
3.3.3.3/32
3.3.3.3/32
4.4.4.4/32
*4.4.4.4/32
192.168.1.0/24
192.168.1.0/24
192.168.2.0/24
192.168.2.0/24
192.168.3.0/24
*192.168.3.0/24
-------------------------------------------------------------------------------
TOTAL: 10 Normal LSP(s) Found.
TOTAL: 2 Liberal LSP(s) Found.
TOTAL: 0 Frr LSP(s) Found.
A '*' before an LSP means the LSP is not established
A '*' before a Label means the USCB or DSCB is stale
A '*' before a UpstreamPeer means the session is in GR state
A '*' before a NextHop means the LSP is FRR LSP
The preceding information shows that the LSP control policy only allows the LDP LSP destined
for 4.4.4.4/32 passing through the transit LSRB and other LDP LSPs on which LSRB is not a
transit node to be set up.
----End
Configuration Files
l
l
Issue 01 (2011-12-30)
In/OutLabel
NULL/1025
1025/1025
NULL/3
1026/3
3/NULL
Liberal
NULL/1027
1027/1027
NULL/3
1028/3
3/NULL
Liberal
Configuration file of LSRA
#
sysname LSRA
#
mpls lsr-id 1.1.1.1
mpls
lsp-trigger all
#
mpls ldp
#
interface GigabitEthernet1/0/0
ip address 192.168.1.1 255.255.255.0
mpls
mpls ldp
#
interface LoopBack1
ip address 1.1.1.1 255.255.255.255
#
ospf 1
area 0.0.0.0
network 192.168.1.0 0.0.0.255
network 1.1.1.1 0.0.0.0
#
return
Configuration file of LSRB
#
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
UpstreamPeer
NextHop
-
192.168.3.1
3.3.3.3
192.168.3.1
-
192.168.3.1
3.3.3.3
192.168.3.1
3.3.3.3
127.0.0.1
-
192.168.3.1
3.3.3.3
192.168.3.1
-
192.168.3.1
3.3.3.3
192.168.3.1
3.3.3.3
192.168.3.2
2 MPLS LDP Configuration
OutInterface
GE1/0/0
GE1/0/0
GE1/0/0
GE1/0/0
InLoop0
GE1/0/0
GE1/0/0
GE1/0/0
GE1/0/0
GE1/0/0
103

Advertisement

Table of Contents
loading

Table of Contents