Huawei AR1200 Series Configuration Manual - Mpls page 19

Huawei AR1200 Series Enterprise Routers
Configuration Guide - MPLS
As the LSP is unidirectional, you need to configure a static LSP from LSRD to LSRA.
Step 6 Establish the static LSP from LSRD to LSRA.
In the same method, configure the static LSP from LSRD to LSRA.
# Configure the ingress LSRD.
[LSRD] static-lsp ingress RDtoRA destination 1.1.1.9 32 nexthop 10.4.1.1 out-label
30
# Configure the transit LSRC.
[LSRC] static-lsp transit RDtoRA incoming-interface gigabitethernet 2/0/0 in-label
30 nexthop 10.3.1.1 out-label 60
# Configure the egress LSRA.
[LSRA] static-lsp egress RDtoRA incoming-interface gigabitethernet 2/0/0 in-label
60
Step 7 Verify the configuration
# After the configuration, run the ping lsp ip 1.1.1.9 32 on LSRD, and you can view that the
LSP is reachable.
Run the display mpls static-lsp or display mpls static-lsp verbose command on the LSRs, and
you can view the status and the detailed information about the static LSP.
In the following example, the display on LSRD is used.
[LSRD] display mpls static-lsp
TOTAL
UP
DOWN
Name
RAtoRD
RDtoRA
[LSRD] display mpls static-lsp verbose
No
LSP-Name
LSR-Type
FEC
In-Label
Out-Label
In-Interface
Out-Interface
NextHop
Static-Lsp Type: Normal
Lsp Status
No
LSP-Name
LSR-Type
FEC
In-Label
Out-Label
In-Interface
Out-Interface
NextHop
Static-Lsp Type: Normal
Lsp Status
----End
Configuration Files
l
Issue 01 (2011-12-30)
: 2
: 2
: 0
FEC
-/-
1.1.1.9/32
: 1
: RAtoRD
: Egress
: -/-
: 40
: NULL
: GigabitEthernet1/0/0
: -
: -
: Up
: 2
: RDtoRA
: Ingress
: 1.1.1.9/32
: NULL
: 30
: -
: GigabitEthernet2/0/0
: 10.4.1.1
: Up
Configuration file of LSRA
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
STATIC LSP(S)
STATIC LSP(S)
STATIC LSP(S)
I/O Label
40/NULL
NULL/30
1 Static LSPs Configuration
I/O If Status
GE1/0/0/- Up
-/GE2/0/0 Up
12