Texas Instruments TMS320C54x User Manual page 436

I
fail to skip (...)
Description
The file may be corrupt.
Action
If the input file is corrupt, try reassembling it.
fail to write (...)
Description The disk may be full or protected.
Action Check disk volume and protection.
file (...) has no relocation information
Description You have attempted to relink a file that was not linked with –r.
file (...) is of unknown type, magic number = (...)
Description
The binary input file is not a COFF file.
fill value for (...) redefined
Description More than one fill value is supplied for an output section. Indi-
vidual holes can be filled with different values with the section
definition.
–i path too long (...)
Description The maximum number of characters in an –i path is 256.
illegal input character
Description
There is a control character or other unrecognized character
in the command file.
illegal memory attributes for (...)
Description
The attributes are not some combination of R, W, I, and X.
Error Messages
Error Messages D-21