Texas Instruments TMS320C54x User Manual page 421

Error Messages
E0005
E0006
D-6
Substitution symbol operand expected
The accumulator operands must be different
The operands must be SP
Description These errors are about illegal operands. The instruction,
parameter or other operand specified was not legal for this
syntax.
Action
Correct the source per the error message text.
Missing field value operand
Missing operand(s)
Operand missing
Tag identification operand required
Tag symbol identifier required
Description These are errors about missing operands; a required oper-
and is not supplied.
Action
Correct the source so that all required operands are declared.
.break must occur within a loop
Conditional assembly mismatch
Matching .endloop missing
Matching .macro missing
No matching .if specified
No matching .endif specified
No matching .endloop specified
No matching .loop specified
Open block(s) inside macro
Unmatched .endloop directive
Unmatched .if directive
Description These are errors about unmatched conditional assembly
directives. A directive was encountered that requires a
matching directive but the assembler could not find the
matching directive.
Action
Correct the source per the error message text.