Texas Instruments TMS320C54x User Manual page 420

Error Messages
E0004
Absolute, well-defined integer value expected
Accumulator specified in second half of parallel instruction may
not be the same as the first
Data size must be equal to pointer size
Expecting accumulator A or B
Expecting ASM or shift value
Expecting dual memory addressing
Identifier expected
Identifier operand expected
Illegal character argument specified
Illegal combination of Smem operands
Illegal endian flag specified
Illegal floating-point expression
Illegal location operand specified, constant expected
Illegal operand
Illegal shift operation
Illegal string constant operand specified
Illegal structure reference
Incorrect bit symbol for specified status register
Invalid data size for relocation
Invalid float constant specified
Invalid identifier, sym , specified
Invalid macro parameter specified
Invalid operand, "char"
Must add to the destination operand
No parameters available for macro arguments
Not expecting direct operand op
Not expecting indirect operand op
Not expecting immediate value operand op
Operand must be auxiliary register or SP
Operand must be auxiliary register
Operand must be T
Offset Addressing modes not legal for MMR addressing
Pointer too big for this data size
Register must be ARn or SP
Single character operand expected
String constant or substitution symbol expected
String operand expected
Structure/Union tag symbol expected
Error Messages D-5