Texas Instruments TMS320C54x User Manual page 413

The hex conversion utility has options that describe the requirements for the
EPROM programmer and options that describe the EPROM memory system.
For Example 4, assume that the EPROM programmer has only one require-
ment: that the hex file be in Intel format.
In the EPROM memory system illustrated in Figure C–4 on page C-17, the
EPROM system memory width is 8 bits and the physical ROM width is 8 bits.
The following options are selected to reflect the requirements of the system:
Option
–i
–memwidth 8
–romwidth 8
Because the application requires the building of a boot table for parallel boot
mode, the following options must be selected as well:
Option
–boot
–bootorg 0x0000
Example 4: Generating a Boot Table for LP Core Devices
Description
Create Intel format.
Set EPROM system memory width to 8.
Set physical ROM width to 8.
Description
Create a boot load table.
Place boot table at address 0x0000.
Hex Conversion Utility Examples C-21