YASKAWA Z1000 Quick Start Manual page 30

i.4 Electrical Installation
u
Terminal Configuration
The control circuit terminals are arranged as shown in
n Wire Size and Torque Specifications
Select appropriate wire type and gauges from
ends. Refer to Table i.11
Screw
Terminal
Size
S1-S7, SC, SN, SP
+V, A1, A2, AC
MA, MB, MC
M3
M1-M6
FM, AM, AC
R+, R-, S+, S-, IG
n Ferrule-Type Wire Terminals
Yaskawa recommends using CRIMPFOX 6, a crimping tool manufactured by PHOENIX CONTACT, to prepare wire ends
with insulated sleeves before connecting to the drive. See
30
Figure i.21 Control Circuit Terminal Arrangement
Table
for ferrule terminal types and sizes.
Table i.10 Wire Gauges
Bare Wire Terminal
Tightening
Torque
Applicable
N•m
wire size
(lb. in)
2
mm
Stranded wire:
0.2 to 1.0
0.5 to 0.6 (24 to 17)
(4.4 to 5.3) Solid wire:
0.2 to 1.5
(24 to 16)
Figure i.22 Ferrule Dimensions
Figure i.21.
+V AC A1 A2 FM AM AC
TB3
S1 S2 S3 S4 S5 S6 S7 SN SC SP +P FE
TB1
M3 M4 M5 M6
TB2
MA MBMC M1 M2
IG R+ R- S+ S-
TB4
i.10. For simpler and more reliable wiring, use crimp ferrules on the wire
Recomm.
wire size
2
(AWG) mm (AWG)
0.75 (18)
Table i.11 for dimensions.
d1
d2
YASKAWA ELECTRIC TOEP C710616 54A YASKAWA AC Drive - Z1000 Quick Start Guide
Ferrule-Type Terminal
Applicable Recomm.
wire size wire size
2 2
mm (AWG) mm (AWG)
0.25 to 0.5
0.5 (20)
(24 to 20)
Wire Type
Shielded wire,
etc.