General
Device concept
During welding, an electronic regulator adapts the power source characteristic to suit the
welding electrode. The result is a lightweight and compact device with excellent ignition
and weld properties.
When cellulose electrodes (CEL) are used, a special operating mode can be selected to
ensure perfect welding results.
TIG welding with touchdown ignition greatly extends the range of applications.
Warning notices
The warning notices and safety symbols on the power source must not be removed or
on the device
painted over. They warn against incorrect operation which can lead to serious injury and
damage.
Meaning of safety symbols on the device:
Risk of serious injury and damage due to incorrect operation.
Do not use the functions described here until you have fully read and understood
the following documents:
-
these operating instructions
-
all the operating instructions for the system components of the power
source, especially the safety rules
Do not dispose of used devices with domestic waste. Dispose of them according
to the safety rules.
The power source has the following proper-
ties:
-
Operation without mains electricity
-
Compact dimensions
-
Robust plastic housing
-
Extremely reliable even under harsh
operating conditions
-
Carrying strap for easy transport on
construction sites, etc.
-
Protected controls
-
Connection sockets with bayonet latch
27