Warning Notices Inside The Device; Proper Use - Fronius ActiveCharger 1000 Operating Instructions & Parts List Manual

Warning notices
inside the device

Proper use

The charger is designed to charge the power sources listed below. Any use above and be-
yond this purpose is deemed improper. The manufacturer shall not be liable for any dam-
age resulting from such improper use. Proper use also includes:
-
-
The following power sources may be charged:
-
-
62
An electric shock can be fatal. Do not open the device!
The housing must never be opened by anyone other than a Fronius-trained ser-
vice engineer. The device must be disconnected from the mains before starting
any work with the housing open. A suitable measuring instrument must be used
to ensure that electrically charged components (e.g. capacitors) are fully dis-
charged. Ensure that the device remains disconnected from the mains until all
work has been completed.
Entladezeit > 5 sek.
Discharge time > 5 sec.
Temps de décharge > 5 s
carefully reading these operating instructions
following all the instructions and safety rules in these operating instructions
WARNING! Charging any other devices can cause serious injury or damage, and
is therefore prohibited.
Fronius AccuPocket 150/400
Fronius AccuPocket 150/400 TIG
The charger is intended solely for commercial use.
This warning sign is located inside the de-
vice. It must NOT be removed or painted
over.
The discharge time of the capacitors is ap-
prox. one minute.