Monitor Menu: Vehicle - Curtis 1232E Manual

+
Note: All vehicle
calculations assume
no tire slippage.
Curtis 1232E/34E/36E/38E & 1232SE/34SE/36SE Manual,
2 4 N O V E M B E R 2 0 1 5
DISPLAY
VARIABLE RANGE
-3276.8 – 3276.7
Vehicle Speed
Vehicle_Speed -32768 – 32767
0x320A 0x00
0.0 – 1000000.0
Vehicle Odometer
Vehicle_Odometer 0 – 10000000
0x3200 0x00
0.000–10.000 g
Vehicle Acceleration
Vehicle_Acceleration 0–10000
0x35C1 0x00
0.00 – 128.00 s Time taken for the vehicle to go from zero
Time to Speed 1
Time_to_Capture_Speed_1
0x35BF 0x00
0.00 – 128.00 s Time taken for the vehicle to go from zero
Time to Speed 2
Time_to_Capture_Speed_2
0x35BB 0x00
0.00 – 128.00 s Time taken for the vehicle to go from
Time Between Speeds
Time_Between_Capture_
Speeds
0x35C4 0x00
0.00 – 128.00 s Time taken for the vehicle to travel from
Time to Dist 1
Time_to_Capture_Distance_1
0x3612 0x00
0.00 – 128.00 s Time taken for the vehicle to travel from
Time to Dist 2
Time_to_Capture_Distance_2
0x3613 0x00
30
os

Monitor Menu: VEHICLE

DESCRIPTION
Vehicle speed, in units of MPH or KPH,
depending on the setting of the Metric
Units parameter (see Program
menu, page 67).
For accurate speed estimates, the
Speed to RPM parameter must be set
correctly (page 67).
Vehicle distance traveled, in units of miles
or km, depending on the setting of the
Metric Units parameter (page 67).
For accurate distance measurements,
the Speed to RPM parameter must be set
correctly (page 67).
Vehicle acceleration. The Speed to RPM
parameter must be set correctly for
accurate measurement (page 67).
rpm to the programmed Capture Speed 1
0 – 32000
»
(see Program
during its most recent such acceleration.
rpm to the programmed Capture Speed 2
0 – 32000
»
(see Program
during its most recent such acceleration.
programmed Capture Speed 1 to
0 – 32000
programmed Capture Speed 2 (see
»
Program Vehicle menu, page 61) during
its most recent such acceleration.
zero rpm to the programmed Capture
0 – 32000
Distance 1 (see Program
page 67) during its most recent such trip.
For accurate distance measurements,
the Speed to RPM parameter must be set
correctly (page 67).
zero rpm to the programmed Capture
0 – 32000
Distance 2 (see Program
during its most recent such trip.
For accurate distance measurements,
the Speed to RPM parameter must be set
correctly (page 67).
4a — MONITOR MENU
»
Vehicle
Vehicle menu, page 67)
Vehicle menu, page 67)
»
Vehicle menu,
»
Vehicle menu)
83