Motor: 1-Spm: Characterization Tests Menu - Curtis 1232E Manual

3 — PROGRAMMABLE PARAMETERS:
PARAMETER
Test Enable
SPM_AutoChar_Test_Enable
0x3862 0x00
Test Throtte
Test_Throttle
0x3034 0x00
Max Test Speed
SPM_AutoChar_Max_Test_Speed
0x38C1 0x00
Max Test Current
SPM_AutoChar_Max_Test_Current
0x38C2 0x00
60
2 4 N O V E M B E R 2 0 1 5
Motor Parameters

MOTOR: 1-SPM: CHARACTERIZATION TESTS MENU

ALLOWABLE
RANGE
0 – 1 This parameter is used to start the SPM motor characterization
procedure. See section 6b for the complete description of the
0 – 1
SPM motor characterization procedure.
-1 – 1 This parameter is used to verify the direction of the motor during
-1 – 1 SPM motor characterization.
See section 6b for the complete description of the SPM
motor characterization procedure and how this parameter is used.
500 – 6000 rpm This parameter is used to set the maximum motor speed
500 – 6000 allowed during SPM motor characterization.
See section 6b for the complete description of the SPM
motor characterization procedure and how this parameter is
used.
10 – 30 % This parameter is used to set the maximum motor current
3277 – 9831 allowed during SPM motor characterization.
See section 6b for the complete description of the SPM
motor characterization procedure and how this parameter is
used.
Curtis 1232E/34E/36E/38E & 1232SE/34SE/36SE Manual,
DESCRIPTION
30
os