Monitor Menu - Curtis 1212 Manual

4
Curtis 1212 Manual
Through its Monitor menu, the 1311 programmer provides access to real-time
data during vehicle operation. This information is helpful during diagnostics
and troubleshooting, and also while adjusting programmable parameters.
VARIABLE
Temp -55 – +127 °C
Battery Voltage
Motor Voltage -27.4 – +27.4 V
Motor Thermal Cutback
Armature Current
-90 – +90 A
Current Limit
Resistance
0–854 m
Throttle
Speed Limit Pot
Mode Input
Reverse Input
Inhibit
Push Input
Main Contactor
Brake
BDI
Drive Time
0–65535 hours

MONITOR MENU

MONITOR MENU
DISPLAY
RANGE DESCRIPTION
Controller's internal temperature.
0–38.2 V Battery voltage.
Voltage drop between the motor terminals.
0–100 % Current cutback during motor over-
temperature, as a percentage of max
current. 100% = no cutback.
Measured motor armature current.
0–90 A Ultimate current limit of the controller, taking
into account boost mode, thermal protection,
etc.
Ω Measured system resistance,
when the motor is stalled.
0–100 % Available throttle input.
0–100 % Available speed limit pot input.
On/Off Status of the mode switch (at J1-4).
On/Off Status of the reverse switch (at J1-12).
On/Off Status of the speed inhibit switch (at J1-6).
On/Off Status of the push switch (at J1-14).
On/Off Status of the main contactor driver.
On/Off Status of the EM brake driver.
0–100 % Status of battery capacity.
Hours of operation since the hourmeter was
last reset (Reset Drive Time = On).
4 — MONITOR MENU
23