Static Fc Routing Configuration Example By Using Vfc Interfaces - HP 5920 SERIES Fc And Fcoe Configuration Manual

Destination/mask
0x010000/8
0x020000/8
0xfffc03/24
0xfffffa/24
0xfffffc/24
0xfffffd/24
# FCping Switch C from Switch A.
[SwitchA-vsan1] fcping fcid fffc03 vsan 1
FCPING fcid 0xfffc03: 128 data bytes, press CTRL_C to break
Reply from 0xfffc03: bytes = 128 time = 23 ms
Reply from 0xfffc03: bytes = 128 time = 9 ms
Reply from 0xfffc03: bytes = 128 time = 19 ms
Reply from 0xfffc03: bytes = 128 time = 14 ms
Reply from 0xfffc03: bytes = 128 time = 25 ms
--- 0xfffc03 fcping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 9/18/25 ms
The output shows that Switch A can reach Switch C.
Static FC routing configuration example by using VFC
interfaces
Network requirements
The fabric comprises three switches, Switch A, B, and C.
Configure static routes to enable any two FC switches to communicate with each other.
Figure 28 Network diagram
VFC1
XGE1/0/1
Switch A
Domain ID: 1
Configuration procedure
1. Configure Switch A:
Protocol
STATIC
STATIC
DIRECT
DIRECT
DIRECT
DIRECT
Switch B
Domain ID: 2
VFC1
VFC2
XGE1/0/1
XGE1/0/2
XGE1/0/2
Preference Cost
10 0
10 0
0 0
0 0
0 0
0 0
VFC2
Switch C
Domain ID: 3
84
Interface
Fc1/0/2
Fc1/0/2
InLoop0
InLoop0
InLoop0
InLoop0