HP 5920 SERIES Fc And Fcoe Configuration Manual page 216

Number of domains: 2
Domain ID
0x01(1)
0x02(2)
The output shows that Switch C is elected as the principal switch, and the principal switch assigns domain
ID 1 to itself.
# Display the routing table information for Switch A.
[SwitchA] display fc routing-table vsan 100
Routing Table: VSAN 100
Destinations : 5
Destination/mask
0x010000/8
0xfffc01/24
0xfffffa/24
0xfffffc/24
0xfffffd/24
The output shows that an FSPF route from Switch A to Switch C exists, with the outgoing interface VFC 10.
# Display the node login information for VSAN 100.
[SwitchA] display fc login vsan 100
Interface VSAN FCID
Vfc1
# Display the brief information about the name server database in VSAN 100.
[SwitchA] display fc name-service database vsan 100
VSAN 100:
FCID
0x010000 0x01(N)
0x020000 0x01(N)
Verifying the configuration on Switch C and Switch D
Verify the configuration on Switch C and Switch D, for example, Switch C.
# Display the node login information for VSAN 100.
[SwitchC] display fc login vsan 100
Interface VSAN FCID
Vfc1
Verifying the configuration on Switch D
Verify the configuration Switch D in the same way you verify the configuration on Switch C.
WWN
48:33:43:2d:46:43:1C:1C [Principal]
48:33:43:2d:46:43:1A:1A [Local]
Routes : 5
Protocol
FSPF
DIRECT
DIRECT
DIRECT
DIRECT
Node WWN
100 0x020000 21:01:00:1b:32:a0:fa:12 21:01:00:1b:32:a0:fa:11
Type
Node WWN
100 0x010000 10:00:00:05:30:00:25:a4 10:00:00:05:30:00:25:a3
Preference Cost
20 100
0 0
0 0
0 0
0 0
Port WWN
PWWN(vendor)
10:00:00:05:30:00:25:a3
21:01:00:1b:32:a0:fa:11
Port WWN
209
Interface
Vfc10
InLoop0
InLoop0
InLoop0
InLoop0
FC4-type:feature
SCSI-FCP:Target
SCSI-FCP:Initiator