Deleting The Zone Database; Enabling Snmp Notifications; Displaying And Maintaining Fc Zones - HP 5920 SERIES Fc And Fcoe Configuration Manual

Step
4. Copy an existing zone to
create a new zone.
5. Copy an existing zone set
to create a new zone set.

Deleting the zone database

You can delete the zone database for a VSAN, including all zone sets, zones, and zone aliases, but not
the active zone set.
To delete the zone database:
Step
1. Enter system view.
2. Enter VSAN view.
3. Delete the zone database.

Enabling SNMP notifications

After you enable SNMP notifications for the zone module, the zone module generates notifications for
important events and sends the notifications to the SNMP module. For more information about SNMP
notifications, see Network Management and Monitoring Configuration Guide.
To enable SNMP notifications:
Step
1. Enter system view.
2. Enable SNMP
notifications for the zone
module.

Displaying and maintaining FC zones

Execute display commands in any view and reset commands in user view.
Task
Display zone alias information.
Command
zone clone src-name dest-name
zoneset clone src-name dest-name
Command
system-view
vsan vsan-id
delete zone database all
Command
system-view
snmp-agent trap enable fc-zone
[ activation-completed |
defaultzone-change |
hardzone-change | merge-failed |
merge-succeeded ] *
Command
display zone-alias [ [ name zone-alias-name ] vsan
vsan-id ]
114
Remarks
The source zone must have been
created, and the destination zone
must not have been created.
The source zone set must have
been created, and the destination
zone set must not have been
created.
Remarks
N/A
By default, SNMP notifications for
the zone module are disabled.