Button Operations - LifeSpan SUPER XL User Manual

a. Press STOP button will stop running
b. Turn off the safety key, it will turn to OFF status
3. SLEEP
In SLEEP status, the treadmill belt stops moving. Both LCD and back light are off.
a. If there is any button operation, it will turn to STOP or OFF status
b. If turn on the safety key, it will turn to STOP status
c. If turn off the safety key, it will turn to OFF status.
4. OFF
In OFF status, the treadmill belt stops moving. The LCD shows "off" and back light is off.
a. If there is any button operation over 10 minutes, it will turn to SLEEP status
b. If turn on the safety key, it will turn to STOP status
c. There will be no respond when pressing any button.

4 Button Operations

Only when the safety key is on, can the user operate the computer that will beep for every
button pressing.
1.START
In STOP status, press START, it will display 3 seconds in TIME window and count down. When
it reached zero, it will turn to RUNNING status and will run at the default speed.
In RUNNING status, press START will not work.
During the 3 seconds counting down, you can press any button to cancel startup and turn to
STOP status.
STOP
In RUNNING status, press STOP button to stop running and turn to STOP status. Each window
will return to zero automatically.
In STOP status, press STOP will not work.
PROGRAM
In STOP status, press PROGRAM button to choose among P1~P12 or 3 USER PROGRAM.
In RUNNING status, press PROGRAM to show your current working program. P0 represents the
USER PROGRAM.
MODE
In STOP status, when SPEED window showing 0.0, press MODE button to choose counting up
or counting down if you are in USER PROGRAM mode.
In RUNNING status, press MODE will not work.
SPEED UP/ SPEED DOWN
In STOP status, press SPEED UP/ SPEED DOWN will adjust the related window value where
"SET" flash.
In RUNNING status, press SPEED UP/ SPEED DOWN to increase/decrease the speed. Press
1