Procedure For Connecting Power; Figure 5.1 Connecting Power (For Single Chassis); Figure 5.2 Connecting Power (Using Power Cord) - Samsung OfficeServ 7200 Installation Manual

CHAPTER 5. Connecting Power
2

Procedure for Connecting Power

Single Chassis Configuration
Use the power cable provided with the OfficeServ 7200 system to connect the input
power terminal on the rear panel of the Chassis to a grounded outlet.
Basic and Expansion Chassis Configuration
The connection procedure depends on the environment of the installation area as
shown below. Select a procedure according to your environment.
Connect each input power cable of the chassis to a grounded outlet.
Page 5-2

Figure 5.1 Connecting Power (for Single Chassis)

Figure 5.2 Connecting Power (using Power Cord)

OfficeServ 7200 Installation Manual/Ed.00
Expansion Chassis
Basic Chassis
© SAMSUNG Electronics Co., Ltd.