Samsung OfficeServ 7200 Installation Manual page 88

CHAPTER 8. Starting the System
4.1.4 C.O. Line Camp-On
If a caller presses a C.O. line code to make an outside call and all C.O. lines are
busy, this function reserves a C.O. line and notifies the caller if the C.O. line
becomes available.
Follow the procedure below and check the C.O. Line Camp-On function.
1) Lift the handset of the test phone and press a C.O. line code.
Verify the C.O. line dial tone.
2) Check if a busy tone rings when all C.O. lines are busy.
3) Upon verifying the busy tone, press the hook flash switch of the test phone.
Check if the busy tone stops.
4) Press the code number of the C.O. line Camp-On function.
Verify the confirmation tone.
5) Replace the handset of the test phone and make the C.O. line idle.
Check if the test phone rings and if the C.O. line becomes busy.
6) Lift the handset of the test phone.
Check if the test phone stops to ring and verify the intercom dial tone and the
C.O. line dial tone.
Page 8-8
OfficeServ 7200 Installation Manual/Ed.00
© SAMSUNG Electronics Co., Ltd.