Installing A Chassis; System Installation Procedure; Selecting Installation Method - Samsung OfficeServ 7200 Installation Manual

Hide thumbs Also See for OfficeServ 7200:

Table of Contents

CHAPTER 2

Installing a Chassis

This chapter describes how to install an OfficeServ 7200 Chassis on the floor,

inside rack or on a wall depending on the installation environment.

The procedure of system installation is as follows.

1) Install the OfficeServ 7200 Chassis on the floor, inside rack or on the wall

depending on the installation environment.

2) Earth to the ground lug behind the basic Chassis.

3) Put the MCP Module into the slot 0 of the basic Chassis. If there is an

expansion Chassis, mount the LCP Module into the slot 0 of the expansion

Chassis.

4) Mount interface Modules into the universal slots (slot 1 through slot 5).

5) Connect an external battery with proper capacity.

6) Connect AC 110/220 V input power.

The OfficeServ 7200 Chassis can be installed on the floor, inside a 19-inch rack or

on a wall depending on the number of Chassis and environment of the installation

area.

Page 2-1

Table of Contents

Show Quick Links

Table of Contents