Table of Contents
Advertisement
III. Webthru SWC 306 Installation Summary, Connection & Placing
1. Installation Summary
Connect Ethernet and Power to Webthru on local network for configuration.
Install Webthru Setup Program into a PC on local network.
Assign an IP address to Webthru and configure administrator's condition.
Configure user's condition.
Place Webthru, re-connect power and Ethernet.
2. Connecting
Connect Ethernet line to the Ethernet port in the rear.
Connect the power supply.
Confirm that the LED of the Ethernet port blinks.
IV. Installing Webthru SWC 306 Setup Program
Insert the Webthru Setup disk.
Drag the Webthru Setup icon onto the desktop.
Double-click on the icon.
9
Webthru SWC 306 User's Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the Webthru SWC 306 and is the answer not in the manual?
Questions and answers