Connecting External/Additional - Samsung OfficeServ 7200 Installation Manual

OfficeServ 7200 Installation Manual/Ed.00
2.2 Connecting External/Additional Page Equipment
Instead of an internal speaker, external broadcasting equipment, such as amps or
speakers, and additional equipment that can broadcast page(ring) signals outside a
building can be connected to the OfficeServ 7200 system.
Connect external/additional page equipment to the MISC1 and MISC2 ports of the
MCP Module. The MIS optional Module should have been mounted on the MCP
Module. The power of the external/additional page equipment should be separately
connected.
Dry contact #1
(For common bell)
Dry contact #2
(For external page)
Dry contact #3
(For external page)
External Page Equipment
Additional Page Equipment
© SAMSUNG Electronics Co., Ltd.
Figure 7.16 Connecting External/Additional Page Equipment
Dry Contact
Dry Contact is a switch that can connect or cut the power or line to external
equipment.
CHAPTER 7. Connecting Stations and Additional Equipment
MISC 2
MISC 1
Page 7-13