Connecting A Wireless Lan Access Point - Method 1; Connecting A Wireless Lan Access Point - Method 2; Table 7.2 Specification For Wireless Lan Connection (Basic); Table 7.3 Specification For Wireless Lan Connection (Combo) - Samsung OfficeServ 7200 Installation Manual

OfficeServ 7200 Installation Manual/Ed.00
1.5 Connecting a Wireless LAN Access Point – Method 1.
Wireless LAN service offered by the OfficeServ 7200 system requires the
following equipment:
MGI : A Module mounted on the OfficeServ 7200 system providing VoIP gateway
WBS24 Basic : Wireless LAN Access Point(AP)
WIP-5000M : Wireless LAN IP phone
Number of the MGI Modules
Maximum number of WBS24s (Basic)
Maximum number of users (WIP-500M)
Number of simultaneous users (WIP-500M)
Connect the WBS24 to the Local Area Network (LAN) by using standard RJ-45
Ethernet cable.
1.6 Connecting a Wireless LAN Access Point – Method 2.
Wireless LAN service offered by the OfficeServ 7200 system requires the
following equipment:
4WLI Module : A Module mounted on the OfficeServ 7200 system for WBS24
connection
WBS24 : Wireless LAN Access Point(AP)
WIP-5000M : Wireless LAN IP phone
Number of the 4WLI Modules
Maximum number of WBS24s (Combo)
Maximum number of users (WIP-500M)
Number of simultaneous users (WIP-500M)
© SAMSUNG Electronics Co., Ltd.

Table 7.2 Specification for Wireless LAN Connection (Basic)

Item
References
For information on how to install and use WBS24 and WIP-5000M, refer to 'WBS24
Service Manual' and 'WIP-5000M User Guide'.

Table 7.3 Specification for Wireless LAN Connection (Combo)

Item
CHAPTER 7. Connecting Stations and Additional Equipment
OfficeServ 7200 System
Basic Chassis
5
40
120
160
OfficeServ 7200 System
Basic Chassis
1
4
48
16
Basic and Expansion Chassis
10
40
120
160
Basic and Expansion Chassis
1
4
48
16
Page 7-7