Safety Conditions - Samsung OfficeServ 7200 Installation Manual

CHAPTER 8. Starting the System
1.2

Safety Conditions

The building where the OfficeServ 7200 system is installed should have lightning
rods and grounding to protect the system against lightning and electric leakage.
Check if the OfficeServ 7200 system is not inclined and is maintained horizontally.
Do not place devices that may cause electromagnetic interference near the system.
Place a fire extinguisher near the system. Since spring coolers can seriously
damage the system, use extinguishers such as Halon 1301 and Carbon Dioxide.
The input power should be between AC 100V and 120 V or between AC 220V
and 240 V. Motors or compressors should not be used.
Check if the AC voltage switch of the PSU is properly set according to the voltage
of the input power, 110 VAC or 220 VAC.
Check if the grounding terminal on the rear panel of the system is properly
connected to the external grounding.
Page 8-2
OfficeServ 7200 Installation Manual/Ed.00
© SAMSUNG Electronics Co., Ltd.