Connecting Power; Cautions When Connecting Power - Samsung OfficeServ 7200 Installation Manual

CHAPTER 5

Connecting Power

This chapter describes how to connect power to the OfficeServ 7200 system.
1

Cautions when Connecting Power

When input power is normally supplied, the AC power is supplied to the Power Supply
Unit(PSU), which charges the external battery. If the input power is interrupted, the
system can be operated using the charged power of the external battery.
Cautions to be taken when connecting power to the OfficeServ 7200 system are as
follows:
The AC power of the system is designed for 110/220 V and is set to 220 V when
manufactured. Set the 110/220 V switch to 110 V when using 110V power.
When changing the AC power in use, adjust the 110/220 V switch of all power
supply units connected to the Chassis.
A single AC outlet should be used solely for the system's AC power. Sharing the
AC power with other devices can cause noise or a voltage drop, resulting in a
system malfunction.
Use a stable power source that can always supply AC power since instantaneous
power failures can cause malfunctions or battery failures.
© SAMSUNG Electronics Co., Ltd. Page 5-1