Sc651-01, -02 - Ricoh MP 305 Plus Field Service Manual

Type
C
Symptoms
An error related to communication using RC Gate Type M was detected, or a problem that
prevents RC Gate from operating was detected at power ON.
This SC is detected only when an error occurs during RC Gate operation.
An SC is not detected if an error occurred during RC Gate installation (because it can be
referenced using SP).
Possible Causes
• The SP settings are invalid.
• The modem line is connected.
• The modem board is installed.
• The wireless LAN card is not installed.
Troubleshooting Procedures
• If the modem board is installed, remove the modem board.
• Check if the wired/wireless LAN is working.

SC651-01, -02

Error Name
SC651-01: Invalid Remote Service Dial-up (Chat Program Parameter Error)
SC651-02: Invalid Remote Service Dial-up (Chat Program Execution Error)
Type
C
Symptoms
An unexpected error occurred when RC Gate Type M dialed up the NRS Center.
Possible Causes
There is a bug in the software.
Troubleshooting Procedures
Nil
SC6xx (Including Controller Service Calls)
429