Table of Contents
Advertisement
4.
Use the center touch-panel buttons to scroll to the number and title of the item that you
want to set and press it. The small entry box on the right activates and shows the below
default or the current settings.
• Refer to the Service Tables for the range of allowed settings.
5.
Do this procedure to enter a setting:
• Press
to toggle between plus and minus and use the keypad to enter the appropriate
number. The number you enter writes over the previous setting.
• Press
to enter the setting. (The value is not registered if you enter a number that is out of
range.)
• Press "Yes" when you are prompted to complete the selection.
6.
If you need to perform a test print, press Copy Window to open the copy window and
select the settings for the test print. Press Start
the copy window to return to the SP mode display.
7.
Press Exit two times to return to the copy window when you are finished.
Exiting Service Mode
• Press the Exit key on the touch-panel.
Service Mode Lock/Unlock
At locations where the machine contains sensitive data, the customer engineer cannot operate the
machine until the Administrator turns the service mode lock off. This function makes sure that work on the
machine is always done with the permission of the Administrator.
1.
If you cannot go into the SP mode, ask the Administrator to log in with the User Tool and
then set "Service Mode Lock" to OFF after he or she logs in: User Tools
Administrator Tools
• This unlocks the machine and lets you get access to all the SP codes.
• The CE can service the machine and turn the machine off and on. It is not necessary to ask the
Administrator to log in again each time the machine is turned on.
2.
Go into the SP mode and set SP5169 to "1" if you must use the printer bit switches.
3.
After machine servicing is completed:
• Change SP5169 from "1" to "0".
• Turn the machine off and on. Tell the administrator that you have completed servicing the
machine.
• The Administrator will then set the "Service Mode Lock" to ON.
and then press SP Mode (highlighted) in
Service Mode Lock
OFF
Service Program Mode
System Settings
25
Advertisement
Chapters
Table of Contents
