Copying; Basic Procedure - Ricoh Aficio 2228C Operating Instructions Manual

Basic Procedure

A A A A
When the machine is set for user
codes, enter a user code (up to
eight digits) using the number
keys, and then press the { { { { #} } } } key.
The machine is now ready to copy.
Reference
For users codes, see "Key Oper-
ator Tools", General Settings
Guide.
B B B B
Make sure "d d d Ready" is shown d
on the display.
If any other function is displayed,
press the { { { { Copy} } } } key.
❖ ❖ ❖ ❖ Initial copy display
C C C C
Make sure no previous settings
remain.
Note
❒ When there are previous set-
tings remaining, press the { { { { Clear
Modes} } } } key before entering your
settings.
D D D D
Place the originals.
Reference
p.13 "Placing Originals"
E E E E
Make the necessary settings.
F F F F
Enter the required number of cop-
ies using the number keys.

2. Copying

Note
❒ The maximum copy quantity
that can be set is between 1 and
999.
G G G G
Press the { { { { Start} } } } key.
Copying starts.
Note
❒ When placing originals on the
exposure glass, press the { { { { #} } } }
key after all the originals are
scanned.
❒ Copies are delivered face down.
- How to operate -
- -
❖ ❖ ❖ ❖ To stop the machine during a multi-
copy run
Press the { { { { Clear/Stop} } } } key.
❖ ❖ ❖ ❖ To return the machine to the initial
condition after copying
Press the { { { { Clear Modes} } } } key.
❖ ❖ ❖ ❖ When clearing entered values
Press the { { { { Clear/Stop} } } } key or [Clear]
on the display.
❖ ❖ ❖ ❖ To check the settings
Press the { { { { Check Modes} } } } key.
19