5. System Maintenance
Type
FCU debug log
Operation panel log
• Debug logs are not saved in the following conditions:
• While erasing all memory
• While data encryption equipment is installed
• While changing the firmware configuration
• Forced power OFF (accidentally disconnecting the outlet)
• Engine debug log in shutdown
• When the power supply to the HDD is off because of energy saving (engine OFF mode /STR
mode)
• When one of the following SC occurs: SC672, SC816, SC819, SC878, SC899, SC859,
SC860, SC861, SC863, or SC864
• Following logs are not saved:
• Log related to the energy saver mode (Engine-off, suspend-mode, or other cases)
Network communication log
Logs related to NRS
IP-FAX log
Access log for unauthorized user (guest)
• HTTP session timeout log
• Auto log-out log
• IC card related log
• Authorization for Fax
372
Storage Timing
• When a specified amount of
FCU debug log is stored in the
FCU. If fax application is
unavailable (e.g. not
installed), the machine does
not transfer the log.
• When an error related to the
operation panel occurs.
Destination (maximum storage
capacity)
HDD or SD card connected to the
service slot
Memory in the operation panel.