Cleaning Or Replacing Uv Lamps In The Base - ergoline INSPIRATION 400 Operating Instructions Manual

Cleaning and maintenance
44/58
– Only touch new lamps in the handling zone.
– Test the function of the safety switch.
The safety switch ensures that the device switches off in the event of a
faulty filter panel.
– Press the switch.
If the switch springs back automatically then it is functional.
– Replace the filter panel.
4.9 Cleaning or replacing UV lamps
in the base
– Lift up the acrylic glass panel, remove lamps covers: see page 37.
Replacing lamps: see page 41.
The assembly is the same process in reverse order.