Faults; Cleaning; Cleaning The Surfaces - ergoline INSPIRATION 400 Operating Instructions Manual

07/2015 1016259-00A
4.2

Faults

Error codes are output to the display to simplify troubleshooting:
If a fault occurs, the error code flashes on the display.

If several errors occur, the error messages are displayed alternately.

Error elimination is acknowledged by pressing the START/STOP button.

If the error cannot be cleared, inform Customer Service - see page 2.

More detailed information regarding the error description and solutions is
available in 'Error Codes' (order no. 1011804-..).
4.3

Cleaning

DANGER!
Infections can be spread by skin contact!
All objects/device parts, which can come into contact with
the user during tanning, must be disinfected after every
tanning session:
– Acrylic glass panel
– Handles and control panel
– Protective goggles
– MP3 cable
– Adjustable air nozzles
NOTE:
Adhere to the stipulated times to ensure thorough disinfec-
tion. Follow the manufacturer's instructions for use.
4.3.1

Cleaning the surfaces

Acrylic glass surfaces
WARNING!
Do not rub with a dry cloth – danger of scratching!
Failure to comply invalidates any warranty claims.
– For the fast, hygienic and proper cleaning of acrylic
glass surfaces, use specially developed cleaning
agents.
– Concentrated disinfectants or solvents (e.g. Lysoform,
ethyl alcohol or other fluids containing alcohol) must
never be used for cleaning.
Acrylic glass panels unusable due to soiling!
Soiling on the panels is burned in by the hot lamps and
results in the long term in unserviceable panels.
– Remove fingerprints and other soiling carefully.
Cleaning and maintenance
Operating instructions – 33/58