Cleaning Or Replacing Uv Lamps And Filter Panels In The Canopy - ergoline PASSION 300-S SUPER POWER Operating Instructions Manual

Cleaning and maintenance
52/80
5.10 Cleaning or replacing UV lamps and
filter panels in the canopy
– Remove the canopy panel: see page 46.
– Remove the lamp cover.
Replacing lamps:
UV low pressure lamps: see page 48.
UV high pressure lamps and filter panels: see page 49.
Replace the starter: see page 49.
The assembly is the same process in reverse order.
When assembling the device please note:
– When replacing the lamp covers ensure that the clips are in contact with
the magnets.
– Use the scratch protection.
– Carefully lay the canopy panel in the guide.