07/2015
1016259-00A
4.10
Cleaning or replacing UV lamps
and filter panels in the canopy
–
Removing the canopy panel: see page 38.
The following components listed in the maintenance plan are fitted in the
canopy:
1.80 m UV low pressure lamps
Facial tanner UV low pressure lamps and the associated starters
Facial tanner UV high pressure lamps
Facial tanner filter panels
These devices have 2 UV low pressure lamps in the facial tanner..
The facial tanner's UV low pressure lamps must be removed first so that the
UV high pressure lamps can be changed.
–
Remove the lamps.
When assembling the device please note:
–
Support the canopy panel with one hand so that it does not fall down.
–
Refit and retighten the screws. Refit the middle screw first and then the
outer screws.
–
Remove fingerprints and other soiling carefully.
4.11
Cleaning or replacing interior lighting
–
Removing the canopy panel: see page 38.
Cleaning and maintenance
Operating instructions – 45/58