07/2015
1016259-00A
4.13
Cleaning the screen
–
Removing the canopy panel: see page 38.
–
Vacuum the screen
When assembling the device please note:
–
Support the canopy panel with one hand so that it does not fall down.
–
Refit and retighten the screws. Refit the middle screw first and then the
outer screws.
–
Remove fingerprints and other soiling carefully.
4.14
Cleaning the canopy filter mats
DANGER!
Fire hazard due to dust particles in the air intake open-
ings!
Dust particles are flammable! Regularly remove dust parti-
cles from the air intake area.
–
Use a vacuum cleaner to prevent dust particles from
getting inside the unit.
–
If necessary, cover the canopy in order to prevent the paint from being
scratched.
–
Remove the filter mat fitted at the back of the canopy.
Cleaning and maintenance
Operating instructions – 47/58