Cleaning Or Replacing Lamps In The Base - ergoline BALANCE 700 HYBRID PERFORMANCE Operating Instructions Manual

Cleaning and maintenance
54/70
– Turn the lamp 90°.
The lettering must be oriented towards the outside (i.e. towards the tan-
ning room or towards the user).
4.9 Cleaning or replacing lamps in the
base
– Lift up the acrylic glass panel and the partition: see page 47.
The following components listed in the maintenance plan are fitted in the
base:
UV low pressure lamps 1.80 m

Beauty Light lamps 1.80 m

– Remove the lamp covers at the head and foot ends.
– Please maintain the correct order of the Beauty Light lamps and UV low
pressure lamps.
a1: UV low pressure lamps
a2: Beauty Light lamps
Replacing lamps: see page 53.
The assembly is the same process in reverse order.