Specifying Rate Limit For Sending Call Home Messages; Specifying Http Proxy Server - Cisco CSR 1000v Series Software Configuration Manual

Configuring Call Home for the Cisco CSR 1000v

Specifying Rate Limit for Sending Call Home Messages

To specify the rate limit for sending Call Home messages, perform the following steps:
SUMMARY STEPS
1. configure terminal
2. call-home
3. rate-limit number
DETAILED STEPS
Command or Action
Step 1 configure terminal
Example:
Router# configure terminal
Step 2
call-home
Example:
Router(config)# call-home
Step 3 rate-limit number
Example:
Router(cfg-call-home)# rate-limit 40

Specifying HTTP Proxy Server

To specify an HTTP proxy server for sending Call Home HTTP(S) messages to a destination, perform the
following steps:
SUMMARY STEPS
1. configure terminal
2. call-home
3. http-proxy {ipv4-address | ipv6-address | name} port port-number
Specifying Rate Limit for Sending Call Home Messages
Purpose
Enters global configuration mode.
Enters Call Home configuration submode.
Specifies a limit on the number of messages sent per
minute.
• number—Range is 1 to 60. The default is 20.
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
249