Cisco CSR 1000v Series Software Configuration Manual page 124

Installation Requirements for Citrix XenServer: Cisco IOS XE 3.x
• Citrix XenServer version supported: 6.0.2, 6.1
• Supported vCPU configurations (also depends on the throughput license and technology package
installed–see Datasheet) : 1 vCPU: requires minimum 2.5 GB RAM allocation
2 vCPUs: requires minimum 2.5 GB RAM allocation
4 vCPUs: requires minimum 4 GB RAM allocation
• Virtual CPU cores required: 1
• Virtual hard disk size: 8 GB minimum
• Supported vNICs : VIF
• Maximum number of vNICs supported per VM instance: 7
• Virtual CD/DVD drive Installed: Required
Installation Requirements for Citrix XenServer (Cisco IOS XE 3.10)
For installation procedures, see
XenServer), on page
• Citrix XenServer version supported: 6.0.2
• Supported vCPU configurations. (Also depends on the throughput license and technology package
installed–see Datasheet). : 4 vCPUs: requires 4 GB minimum RAM allocation
• Virtual CPU cores required: 1
• Virtual hard disk size: 8 GB minimum
• Supported vNICs : VIF
• Maximum number of vNICs supported per VM instance: 7
• Virtual CD/DVD drive Installed: Required
(Cisco IOS XE 3.10S Release and earlier) The network added to NIC0 maps to the Gigabit Ethernet 0
Note
management interface on the Cisco CSR 1000v.
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
112
Manually Creating the Cisco CSR 1000v VM Using the .iso File (Citrix
107.
Installing the Cisco CSR 1000v in Citrix XenServer Environments