Installing Broadband Feature License - Cisco CSR 1000v Series Software Configuration Manual

Installing Cisco CSR 1000v Licenses
• We recommend that you install the broadband feature license before installing any memory add-on
• The VM must have enough memory allocated to accommodate the additional memory. See
For more information about configuring broadband support, see
Configuration Guide

Installing Broadband Feature License

SUMMARY STEPS
1. Obtain the PAK.
2. enable
3. show license udi
4. Convert the PAK to a license by entering the PAK and the UDI into the Cisco Product License registration
portal
5. show platform software vmemory info
6. configure terminal
7. platform broadband {1K | 2K | 3K | 4K | 5K | 6K | 7K | 8K}
8. platform memory add memory
9. end
10. license install stored-location-url
11. write memory
12. reload
13. show license detail
14. show platform software vmemory info
15. (Optional) Install memory add-on licenses as needed. See
163.
DETAILED STEPS
Command or Action
Step 1
Obtain the PAK.
Step 2
enable
Example:
Router> enable
Step 3 show license udi
licenses.
the Cisco CSR 1000v Memory Allocation, on page 162
and Intelligent Services Gateway Configuration
http://www.cisco.com/go/license
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
Installing CSL Feature Add-on Licenses for Cisco IOS XE 3.13S and Later
for more information.
Broadband Access Aggregation and DSL
Guide.
Installing Memory Add-on License, on page
Purpose
The PAK is provided to you when you order or purchase the right
to use a feature set.
• The PAK serves as a receipt and is used as part of the
process to obtain a license.
Enables privileged EXEC mode.
• Enter your password if prompted.
Displays all the UDI values that can be licensed in a system.
Understanding
167