Information About Installing Broadband Feature License - Cisco CSR 1000v Series Software Configuration Manual

Installing CSL Feature Add-on Licenses for Cisco IOS XE 3.13S and Later
Command or Action
Step 12
show license detail
Example:
Router# show license detail
Step 13 show platform software vmemory info
Example:
Router# show platform software vmemory info
Memory Upgrade Limits:
Total System Memory:3894 MB
Memory From Upgrade Licenses:N/A(Smart License
Enabled)
Memory From Feature Licenses:N/A(Smart License
Enabled)
Memory Available For Upgrade:
Available System Memory:0 MB
Available Upgrade Licensed Memory:N/A(Smart
License Enabled)
Available Feature Licensed Memory:N/A(Smart
License Enabled)
Current Memory Allocation:
IOSD:2358 MB (default) + 0 MB upgrade
Data Plane:1536 MB (default) + 0 MB upgrade
The following is an example of the show license command with details of a memory add-on license shown:
Router# show license
Index 1 Feature: ax
Index 2 Feature: mem_4G

Information About Installing Broadband Feature License

Beginning with Cisco IOS XE 3.13S, the Cisco CSR 1000v supports the Broadband Network Gateway feature
set and the Intelligent Services Gateway feature set. The required broadband feature license (L-CSR-BB-1K=)
provides up to 4 GB of additional memory and support for up to 1000 broadband sessions.
The following restrictions apply:
• The APPX feature license with a minimum of 1 Gbps maximum throughput must be installed.
• You can install multiple broadband feature licenses to increase the number of broadband sessions.
• If both a broadband feature license and memory add-on licenses are installed, then the broadband license
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
166
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: 1/1/0
License Priority: Medium
However, installing additional broadband feature licenses will not add more memory. To add more
memory beyond the 4 GB installed with the first broadband feature license, you must install a separate
memory add-on license.
takes higher priority than any memory add-on licenses installed. When the Cisco CSR 1000v is reloaded,
the broadband feature license takes effect first, before any installed memory add-on licenses.
Purpose
Displays the license information to verify the installation of
the memory license(s).
Verifies the updated memory allocation on the Cisco CSR
1000v.
(Active/In-use/Violation)
Installing Cisco CSR 1000v Licenses