Cisco CSR 1000v Series Software Configuration Manual page 67

Using Cisco IOS XE Software
Table 13: Accessing and Exiting Command Modes
Command Mode
User EXEC
Privileged EXEC
Global configuration
Interface configuration
Entering a question mark (?) at the CLI prompt displays a list of commands available for each command
mode. You can also get a list of keywords and arguments associated with any command by using the
context-sensitive help feature.
To get help specific to a command mode, a command, a keyword, or an argument, use one of the commands
listed in the table below.
Table 14: Help Commands and Purpose
Command
help
abbreviated-command-entry?
abbreviated-command-entry<Tab>
?
command ?
Access Method
Log in.
From user EXEC mode, use the
enable EXEC command.
From privileged EXEC mode,
use the configure terminal
privileged EXEC command.
From global configuration
mode, specify an interface using
an interface command.
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
Prompt
Router>
Router#
Router(config)#
Router(config-if)#
Purpose
Provides a brief description of the help system in any
command mode.
Provides a list of commands that begin with a
particular character string. (No space between
command and question mark.)
Completes a partial command name.
Lists all commands available for a particular
command mode.
Lists the keywords or arguments that you must enter
next on the command line. (Space between command
and question mark.)
Using Cisco IOS XE Software
Exit Method
Use the logout command.
To return to user EXEC mode,
use the disable command.
To return to privileged EXEC
mode from global configuration
mode, use the exit or end
command.
To return to global
configuration mode, use the exit
command.
To return to privileged EXEC
mode, use the end command.
55