Installation Requirements For Citrix Xenserver: Cisco Ios Xe 3.X - Cisco CSR 1000v Series Software Configuration Manual

Installing the Cisco CSR 1000v in Citrix XenServer Environments
Installation Requirements for Citrix XenServer: Cisco IOS XE
3.x
Installation Requirements for Citrix XenServer (Cisco IOS XE 3.14, 3.15, 3.16, 3.17)
For installation procedures, see
XenServer), on page
• Citrix XenServer version supported: 6.2
• The following supported vCPU configurations also depend on the throughput license and technology
• Virtual CPU cores required: 1
• Virtual hard disk size: 8 GB minimum
• Supported vNICs : VIF
• Maximum number of vNICs supported per VM instance: 7
• Virtual CD/DVD drive Installed: Required
Installation Requirements for Citrix XenServer (Cisco IOS XE 3.13)
For installation procedures, see
XenServer), on page
• Citrix XenServer version supported: 6.2
• Supported vCPU configurations (also depends on the throughput license and technology package
• Virtual CPU cores required: 1
• Virtual hard disk size: 8 GB minimum
• Supported vNICs : VIF
• Maximum number of vNICs supported per VM instance: 7
• Virtual CD/DVD drive Installed: Required
Installation Requirements for Citrix XenServer (Cisco IOS XE 3.11, 3.12)
For installation procedures, see
XenServer), on page
Manually Creating the Cisco CSR 1000v VM Using the .iso File (Citrix
107.
package installed–see Datasheet.
1 vCPU: requires minimum 4 GB RAM allocation
2 vCPUs: requires minimum 4 GB RAM allocation
4 vCPUs: requires minimum 4 GB RAM allocation
Manually Creating the Cisco CSR 1000v VM Using the .iso File (Citrix
107.
installed–see Datasheet) : 1 vCPU: requires minimum 2.5 GB RAM allocation
2 vCPUs: requires minimum 2.5 GB RAM allocation
4 vCPUs: requires minimum 4 GB RAM allocation
Manually Creating the Cisco CSR 1000v VM Using the .iso File (Citrix
107.
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide

Installation Requirements for Citrix XenServer: Cisco IOS XE 3.x

111