Bootstrapping The Csr Configuration; Bootstrap Properties - Cisco CSR 1000v Series Software Configuration Manual

Bootstrapping the CSR Configuration

Bootstrapping the CSR Configuration

Bootstrap Properties

The Cisco CSR 1000v bootstrap properties are specified in the ovf-env.xml file. For an example ovf-env.xml
file, see
Table 27: Bootstrap Properties
Property
console
domain-name
enable-scp-server
enable-ssh-server
hostname
ios-config
license
login-password
login-username
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
126
Example ovf-env.xml File, on page
Installing the Cisco CSR 1000v in KVM Environments
128.
Description
(Cisco IOS XE 3.17S and later)
Configures the console mode.
Possible values: auto, virtual, serial
Domain name of the router.
Enables the IOS SCP feature.
Enables remote login using SSH and disables remote
login via Telnet. Requires that the login username
and password are set.
Hostname of the router.
Enables execution of a Cisco IOS command.
To execute multiple commands, use multiple instances
of ios-config, with a number appended to each
instance—for example, ios-config-1, ios-config-2.
The commands are executed in numerical order
according to the appended number.
Example
ios-config-1="username cisco priv 15 pass
ciscoxyz"
ios-config-2="ip scp server enable"
ios-config-3="ip domain lookup"
ios-config-4="ip domain name cisco.com"
(Cisco IOS XE 3.13S and later)
Configures the license technology level that is
available when the Cisco CSR 1000v boots.
Login password for the router.
Login username for the router.