Cisco CSR 1000v Series Software Configuration Manual page 210

Installing CSL Regular Licenses for Cisco IOS XE 3.12S and Earlier
Command or Action
Step 13
configure terminal
Example:
Router# configure terminal
Step 14 platform hardware throughput level MB{10 | 100
| 1000 | 250 | 2500 | 50 | 500 | 5000}
Example:
Router(config)#
level 500
Step 15 end
Example:
Router(config)# end
Step 16 show platform hardware throughput level
Example:
show platform hardware throughput
Router#
level
Example:
The current throughput level is 50000 kb/s
What to Do Next
Repeat these steps for each license available for your PAK.
The following is an example of the show license detail command showing an installed active license:
Router# show license detail
Index: 1
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
198
platform hardware throughput
Feature: prem_100M
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Store Index: 0
Store Name: Primary License Storage
Purpose
Enters global configuration mode.
(Optional) Changes the maximum throughput level for the Cisco
CSR 1000v. The available throughput options vary
depending on the release version.
Rebooting the Cisco CSR 1000v is not
Note
required.
Exits global configuration mode.
Verifies that the Cisco CSR 1000v maximum throughput level
matches that of the installed license.
Version: 1.0
Installing Cisco CSR 1000v Licenses